You are looking at 17x7 · 4x100/4x108 · +40mm. Bolt pattern and offset are not the same on all of them — check what your vehicle takes before you order.
Check these three numbers against your vehicle before you order. Bolt pattern 4x100 / 4x108 · Offset +40mm · Hub bore 72.56mm. Not sure? Call (361) 334-0324 and we will check it with you before you buy.
Final sale: wheels cannot be returned. You can cancel the order before it ships, less a 30% fee. Damage or a defect reported within 72 hours of delivery is still replaced or refunded with no fee. Confirm the fitment, or call (361) 334-0324, before you order. Returns policy
Ships direct from the warehouse, so there is nothing to collect at the lot. Inspect it before you accept the delivery. If it arrives damaged, note the damage with the driver and tell us within 72 hours of delivery so we can file the claim.
Shipping: This ships direct to you from the warehouse. Inspect it before you accept the delivery – if it arrives damaged, refuse it, note the damage with the driver and call us. (361) 334-0324
5 vehicles, each with its own note.
Show the 5 vehicles
2024 Mitsubishi Mirage (hub-centric rings recommended, 72.56 to 56.15 mm); 2021-2022 Chevrolet Spark (hub-centric rings recommended, 72.56 to 56.5 mm); 2021-2022 Ford EcoSport (hub-centric rings recommended, 72.56 to 63.36 mm); 2019-2020 Honda Fit (hub-centric rings recommended, 72.56 to 56.15 mm); 2018 Mazda MX-5 Miata (hub-centric rings recommended, 72.56 to 54.06 mm)
Motegi Racing MR142 CS8 17×7 4×100/4×108 40mm Offset, sold as a single wheel. Tires, lug nuts and fitting are not included.
Brand
Motegi Racing
Model
MR142 CS8
Diameter
17″
Width
7″
Bolt pattern
4×100/4×108
Offset
40mm
Hub bore
72.56mm
Part number
MR14277008940
Sold as
one wheel
Wheel weight
20.8 lb
Load rating (per wheel)
1,675 lb (759 kg)
Backspacing
5.57 in
Construction
Cast Aluminum
Lug count
4
Bolt pattern (inches)
4x100/4.25
Finish
Satin Black W/ Red Stripe
Center cap part number
MRCAP-S1R
TPMS sensor compatible
Yes
Certification
SAEJ2530 JWL VIA
Specifications
About the photograph. The manufacturer shoots one photograph per wheel style and finish and uses it for every drilling, so the number of lug holes in the picture can differ from this part. This part is 4×100/4×108.
Check the fitment numbers against your vehicle. A wheel with the right bolt pattern can still hit a brake caliper or fender on the wrong offset, and a hub bore smaller than your hub will not seat. Call us at 361-334-0324 and we will check it with you before you order.
Older than 1980?
Call (361) 334-0324 and we will look it up.
These fit your vehicle
More than one size fits most vehicles — it
depends how yours was built. Yours is printed on the sticker inside the
driver’s door, and on the side of the tire you have now.
Call or email
Stinger Auto Sales LLC 3602 S. Padre Island Dr. Corpus Christi, TX 78415
