Check these three numbers against your vehicle before you order. Bolt pattern 5x120 · Offset +35mm · Hub bore 74.1mm. Not sure? Call (361) 334-0324 and we will check it with you before you buy.
Final sale: wheels cannot be returned. You can cancel the order before it ships, less a 30% fee. Damage or a defect reported within 72 hours of delivery is still replaced or refunded with no fee. Confirm the fitment, or call (361) 334-0324, before you order. Returns policy
Ships direct from the warehouse, so there is nothing to collect at the lot. Inspect it before you accept the delivery. If it arrives damaged, note the damage with the driver and tell us within 72 hours of delivery so we can file the claim.
Shipping: This ships direct to you from the warehouse. Inspect it before you accept the delivery – if it arrives damaged, refuse it, note the damage with the driver and call us. (361) 334-0324
11 vehicles, each with its own note.
Show the 11 vehicles
2019 BMW 330i GT xDrive (hub-centric rings recommended, 74.1 to 66.56 mm); 2019 BMW 340i GT xDrive (hub-centric rings recommended, 74.1 to 66.56 mm); 2019 BMW 430i (hub-centric rings recommended, 74.1 to 72.56 mm); 2019 BMW 430i xDrive (hub-centric rings recommended, 74.1 to 72.56 mm); 2017 Buick Regal (hub-centric rings recommended, 74.1 to 67.06 mm); 2016 BMW 328i (hub-centric rings recommended, 74.1 to 72.56 mm); 2016 BMW 328i xDrive (hub-centric rings recommended, 74.1 to 72.56 mm); 2015 BMW 335i (hub-centric rings recommended, 74.1 to 72.56 mm); 2013-2014 Acura TL (hub-centric rings recommended, 74.1 to 64.1 mm); 2012 BMW 328i (hub-centric rings recommended, 74.1 to 72.56 mm); 2012 BMW 328i xDrive (hub-centric rings recommended, 74.1 to 72.56 mm)
Motegi Racing MR147 CM7 18×8.5 5×120 35mm Offset (MR14788552435), sold as a single wheel. Tires, lug nuts and fitting are not included.
Brand
Motegi Racing
Model
MR147 CM7
Diameter
18″
Width
8.5″
Bolt pattern
5×120
Offset
35mm
Hub bore
74.1mm
Part number
MR14788552435
Sold as
one wheel
Wheel weight
20.3 lb
Load rating (per wheel)
1,280 lb (580 kg)
Backspacing
6.13 in
Construction
Flow Formed Aluminum
Build
Flow formed
Lug count
5
Finish
Gun Metal
Center cap part number
MRCAPB-GM
TPMS sensor compatible
Yes
Certification
SAEJ2530 JWL VIA
Specifications
About the photograph. The manufacturer shoots one photograph per wheel style and finish and uses it for every drilling, so the number of lug holes in the picture can differ from this part. This part is 5×120.
Check the fitment numbers against your vehicle. A wheel with the right bolt pattern can still hit a brake caliper or fender on the wrong offset, and a hub bore smaller than your hub will not seat. Call us at 361-334-0324 and we will check it with you before you order.
Older than 1980?
Call (361) 334-0324 and we will look it up.
These fit your vehicle
More than one size fits most vehicles — it
depends how yours was built. Yours is printed on the sticker inside the
driver’s door, and on the side of the tire you have now.
Call or email
Stinger Auto Sales LLC 3602 S. Padre Island Dr. Corpus Christi, TX 78415
